User's Manual

Power On Setting Mode
Steps Operating Process Photographs
a
The system will enter the Power On setting
mode automatically after setting up the Tire
Temperature-Over Temperature Setting.
b
The display shown is the factory default for tire
pressure value. This is “bar” in blue. If no
modification is needed, then press the SET
button to end the set up mode and back to the
normal operation mode.
NOTE: The system may use other unit for
pressure by psi or bar, depending on the region.
c
Press the Mode button to enter the temperature
display mode as the shown on the right hand
side, and the unit for temperature is . ℃
NOTE: The system may use other unit for
pressure by ℃、℉ , depending the system for
different area of the world.
d
Pressing the Mode button, will enter to the Tire
Pressure~ temperature by rotation mode.
e
Press the SET button, and the system will
complete the Power On Setting Mode and back
to the normal operation mode to monitoring tire
pressure/temperature and battery voltage.