User's Manual

b
The wireless receiver and display unit shows the
standard cold tire pressure. The factory default
value (9.0 bar) is shown in blue and the blue
light indicates the ”bar” or pre-selected units
(psi). If no modification is needed, press the
SET button to enter the next setup mode.
NOTE: If the pressure unit is in ”psi” , the display
will flash 130.
c
Pressing the MODE button once, will increase
the cold tire pressure value by 1 unit; and the
unit increases by 0.2 bar with each press of the
button, when it has reached 12 bar, pressing the
button again will return the system unit to 8.0
bar.
NOTE: If the user chooses ”psi” mode, 2 psi will
be added with each press of the button, the
range for ”psi” is 116 psi~174 psi.
d
Press the SET button to complete the Single
Wheel-Standard Cold Tire Pressure Setting. The
system will automatically enter the Double
Wheels-Standard Cold Tire Pressure Setting
Mode.
Double Wheels-Standard Cold Tire Pressure Setting Mode
Steps Operating Process Photographs
a
The system will enter the Double Wheels
-Standard Cold Tire Pressure Setting Mode
automatically after setting up the Single Wheel
-Standard Cold Tire Pressure Setting.
b
The wireless receiver and display unit shows the
standard cold tire pressure. The factory default
value (9.0 bar) is shown in blue and the blue
light indicates the ”bar” or pre-selected units
(psi). If no modification is needed, press the
SET button to enter the next setup mode.
NOTE: If the pressure unit is in ”psi” , the display
will flash 130.
c
Pressing the MODE button once, will increase
the cold tire pressure value by 1 unit; and the