User's Manual

3. Display Installation:
Step Operation Process Photographs
a
The holder should be fixed on the suitable and
visible place around pilot seat, the front side of the
holder should be oriented to the driver’s eye.
b
The transmission wire head should be connected to
the SMA port which is behind of the display.
c
Connect the Red and Green wire to the ACC；Black
& White wire connect to the ground.
d
The USB power cable should be connected to the
USB port which is behind of the display.
e
Inhale the display to the holder and adjust the
suitable and visible angle, then accomplished the
installation.
Turn on the car power to monitor the tire pressure, tire temperature and car battery after done the
installation.