Manualshelf

User's Manual

ManualsBrandsOro Technology ManualsAutomotiveTire Pressure Monitoring System
123456
b Take off the tire and bleed the air, then. to change to
the ORO-Technology TPMS valve, follow the steps:
1. Snap in the valve from the internal edge side of
the wheel.
2. Adjust the valve’s angle, and make sure the
valve is vertical to the edge of the wheel.
3. Put on the circle screw (washer)from the outside
of the wheel.
4. Tighten the valve with the nylok screw from the
outside of the wheel.
5. Use the alan key provided to tighten.
b