User's Manual

6


d Place the No. 2 tire sensor to the tire which i
s
marked No.2, and set up the other 2 sensor
s
in the same manner as shown in the step “c”.

e
Make sure there is no other liquid or dust
present around the area of the tire sensor.

f
After installation, inflate the tire to the
appropriate air pressure as suggested in
each vehicle’s user manual.
g
Balance the tires with the tire balance
machine.
h
Place the tires back to it’s corresponding
position as shown in the photograph on
step “a”.


Once TPMS is installed correctly, turn on the ignition to start monitoring the tire
pressure/temperature and voltage.