User's Manual

4


If the user wants to connect the power directly, please visit an electrical auto shop, dismantle
the cigar plug and solder the red and green cable to the AC power, the black and white
cables are for grounding.

2. Tire Sensor Installation

Steps Operaion Process Photographs
a Take off the 4 tires and mark 1~4 for each tire
position.
No.4 = Left Front Tire；No.1 = Right Front Tire
No.3 = Left Rear Tire； No.2 = Right Rear Tire

b
Take off the tire and bleed the air, then, to
change to the ORO-Technology TPMS
valve, follow the steps:
1. Snap in the valve from the internal edge
side of the wheel.



2. Adjust the valve’s angle, and make sure
the valve is vertical to the edge of the
wheel.
