User's Manual

21



3. Display not receiving
any signal from the
4 sensors but
shows E2 after
connecting the
power.
1. Wrong ID setting on 4 tires.
Reset the ID using Mode 5.
2. Failure on the receiver
circuit of the display.
After the distributor got back the
broken-down display be repaired,
should reset the ID using Mode 5.

4. Display is not
receiving any signal
on 2 or more 3 tires
from the sensor but
shows E2 with it’s
position after
connect the power.
1. Incorrect ID setting on the tire.
Reset the ID using Mode 6.
2. Failure on the Tire Sensor.
Request for a new sensor from
the distributor and reset the
system using Mode 6 in order to
change the ID, return the failed
display to the manufacturer.
5. No response on the
MODE and SET
button.
Faulty display.
After the distributor got back the
broken-down display be repaired,
should reset the ID using Mode 5.
6. Pressure (or
Temperature) shows
in wrong number
and position.
1. Tire on the wrong position.
Ask the Tire Shop to place the
tires in the correct position.
2. Wrong ID setting on 4 tires.
Reset the ID using Mode 5.
7. No Sound on the
display.
Faulty Display.
After the distributor got back the
broken-down display be repaired,
should reset the ID using Mode 5.