User's Manual

20


Caution
The range of warranty are not including the “Aluminum Valves” and “ Nylok screws”, the user
should change the “Aluminum Valves” and “Nylok screws” when is changing the tire sensor.
Attention
Any user self repairing or modifying the system included the device are NOT protected under
the warranty policy.
Any other question which related to the warranty policy, please feel free to contact with
your nearest authorized distributor or contact directly to us by: [e-mail]
Others related ORO TPMS latest and updated news, please go search: www.oro-technology.com

ORO Technology thanks for your using ORO TPMS and wish you have a safely drive always.


Appendix


bar
Tire pressure unit, 1 bar = 0.1N/ mm
2
psi
Tire pressure unit, 1 psi = 0.0689 bar.
kPa
Tire pressure unit, 1 kPa = 0.01 bar
o
C
Temperature unit, Centigrade = (Fahrenheit-32) x 5/9
o
F
Fahrenheit

ORO W401 Failure - Troubleshooting


Failure Phenomenon Possible Cause Troubleshooting steps
1. No Response after
connecting to the
power.
1. Plug between the display
and power cable may be
loosed.
Re-plug correctly between display
and USB port.
2. Faulty Power Cable.
Request for an exchange from
the distributor and return the
failure cable to the distributor.
3. Faulty fuse inside the
display device.
After the distributor got back
the broken-down display be
repaired, should reset the ID
using Mode 5.
2. Abnormal display
number or light.
Failure on the display.
After the distributor got back the
broken-down display be repaired,
should reset the ID using Mode 5.