User's Manual



Fig. 1 Fig.



2. Set Up for Right Rear (RR) Tire Sensor

The RR tire symbol will be flashing green with a blue “2” on the display. This means the RR

tire is ready for the set up as per below, Fig. 1, in the meantime, the user should deflate the

tire pressure rapidly over 0.3bar/30kPa or 4 psi within 15 sec. until there is a beep sound,

which means the user has completed the set up for RR tire. The system will then proceed

back to the normal display mode. If there is no need to set up the RR tire sensor, just press

the SET button to skip this process. The system will then proceed to LR tire sensor set up

mode as shown below Fig. 2.



Fig. 1 Fig.



3. Sep Up for Light Rear (LR) Tire Sensor

The LR tire symbol will be flashing green with a blue “3” on the display. This means the LR

tire is ready for the set up as per below, Fig. 1, in the meantime, the user should deflate the

tire pressure rapidly over 0.3bar/30kPa or 4 psi within 15 sec. until there is a beep sound,

which means the user has completed the set up for LR tire. The system will then proceed

back to the normal display mode. If there is no need to set up the LR tire sensor, just press

the SET button to skip this process. The system will then proceed to LF tire sensor set up

mode as shown below Fig. 2.



Fig 1 Fig