User's Manual


NOTICE 15

Mode 3：Front Tire Diagonal Exchange, Rear Tire Parallel Exchange to Front
The display will show as per below figures, When the display shows a yellow “3”, this
means the display is now in mode 3 and the 4 red lights means the tire position are not set
as shown in Fig. 1. The 4 green lights means the tire position that user wants to set up as
shown in Fig. 2. Press the SET button continuously for 3 sec. until sounds beep which
means has accomplished the set up for mode 3. (Front Tire Diagonal Exchange, Rear Tire
Parallel Exchange to Front), then the system will back to the normal operating display.


Fig. 1 Fig. 2

Mode 4: Right Side and Left Side Tire Parallel Exchange
The display will show as per below figures, When the display shows a yellow “4”, this
means the display is now in mode 4 and the 4 red lights means the tire position are not
set as shown in Fig. 1. The 4 green lights means the tire position that user wants to set
up as shown in Fig. 2. Press the SET button continuously for 3 sec. until sounds beep
which means has accomplished the set up for mode 4. (Right Side and Left Side Tire
Parallel Exchange), then the system will back to the normal operating display.

Fig. 1 Fig. 2

Mode 5: Random Repositioning
The user should install the tire to their desired position before entering mode 5. When
the display shows a yellow “5”, this means that it is now in mode 5.
Reset starting from Right Front Tire -> Right Rear Tire -> Left Rear Tire -> Left Front
Tire in order to complete the set up mode 5.