User's Manual

14


Set Up Process for Enter the Tire Changing and Rotation
Depress the
SET button and MODE button simultaneously for 3 sec., and the system will
enter set up mode 1, pressing once each time will allow the user to traverse from mode 1
to mode 6 and back to normal display.

Description for Each Set Up Process
Mode 1: Front and Rear Tire Parallel Exchange
The display will show as per below figures. When the display shows a yellow “1”, this means
the display is now in mode 1 and the 4 red lights means the tire position are not set as shown
in Fig. 1. The 4 green lights means the tire position that user wants to set up as shown in Fig.
2. Press the
SET button continuously for 3 sec. until sounds beep which means has accomplished
the set up for mode 1. (Front and Rear Tires Exchange) then the system will back to the normal
operating display.

Fig. 1 Fig. 2

Mode 2: Tire Diagonal Exchange
The display will show as per below figures. When the display shows a yellow “2”, this means
the display is now in mode 2 and the 4 red lights means the tire position are not set as
shown in Fig. 1. The 4 green lights means the tire position that user wants to set up as
shown in Fig. 2. Press the SET
button continuously for 3 sec. until sounds beep which
means has accomplished the set up for mode 2. (Tire Diagonal Exchange), then the system
will back to the normal operating display.

Fig. 1 Fig. 2