User's Manual

13



e
Warning Situation: When the tire sensor
battery level is low.
(Suggest to change the sensor as soon as
possible.)
Warning System: The abnormal tire
flashes green, and the low battery symbol
lights up.

f
Warning Situation: When the Monitor run
out of initial setting up by factory default.
Warning System: The four display unit
shows by E1 and not lighting on four tires
symbols.

g
Warning Situation: When Display unit
sensor is unable to receive a signal from one
of the tire sensor for more than 10 minutes.
Warning System: The bad transmission
symbol lights up and the affected tire symbol
will not be lighted up with a reading of E2.

NOTE: The user can press the MODE button continuously for 3 sec. to stop the warning sound.

W401 Reset for Tire Changing and Rotation

Upon completion of changing or rotation of tires, the user should also reset the position
of the tires on the display unit. W401 has provided 6 modes where users can reset quickly
and keep the tire position as it in on the display unit.
The user should ascertain that the display is plugged in, when carrying out the tire
changing/rotating mode, if the power is interrupted, please follow the reset process in
order to proceed successfully. The user should confirm whether the display is able to
monitor all the tire information correctly, if not, please carry out the reset process.