User's Manual

10


Tire Temperature-Over Temperature Setting Mode

Steps Operating Process Photographs
a
The system will enter the Tire Temperature-Ove
r
Temperature Setting Mode automaticall
y
after setting up the Rear Tire-Cold Tire
Pressure Setting.

b
The display will show the factory default
temperature limit for the tires (80
o
C) in
blue. If no modification is needed, then
press the SET button to enter the next
set up mode.
NOTE: If the unit is
o
F the number 176 will
be flashing.

c
Press the MODE button to change the limit
for the temperature, the unit will add 1
o
C with
each depression. The range for temperature is
between 60
o
C~99
o
C, the system will return
back to 60
o
C after reaching 99
o
C.
NOTE: If the unit is
o
F , each depression will
add 1
o
F, The range for
o
F is from 140
o
F~
212
o
F

d
Push the SET button to complete the Tire
Temperature-Over Temperature setting
and the display will enter to the Power On
Setting Mode.


Power On Setting Mode

Steps Operating Process Photographs
a
The system will enter the Power On setting
mode automatically after setting up the Tire
Temperature-Over Temperature Setting.

b
The display shown is the factory default for
tire pressure value. This is “psi” in yellow.
NOTE: The system may use other unit for
pressure by psi, kPa or bar, depending on
the region.