User's Manual

f After installation, inflate the tire to the appropriate air
pressure as suggested in the vehicle’s user manual.
g
Balance the tires with the tire balance machine.
h
Place the tires back to it’s corresponding position as
shown in the photograph on step a.
Once TPMS is installed correctly, turn on the ignition to start monitoring the tire
pressure/temperature and voltage.
WARNING: The tire sensor will transmit a signal when the vehicle speed is over 20km/hr and
will stop transmitting a signal when the vehicle has stopped for over 5 minutes. If the tire
pressure is lower than 18psi, the tire sensor will transmit abnormal signal continuously to the
user.
There are 2 types for model W410, General Type and Power Saving Type.
a. General Type: transmit a signal each 1 minute when the vehicle speed is under 25km, and
transmit a signal each 15sec. when the speed is over 25km.
b. Power Saving Type: transmit a signal each 15sec. when the vehicle speed is over 25km,
and stop transmit signal upon the vehicle is stopped over 5min. However, if the tire
pressure is lower than 18psi (or 1.24bar), no matter whether the vehicle is moving or
stopped, the transmitter will transmit a signal each 30 sec. to warn the vehicle driver.