User's Manual

Set up Tire High Temperature Value︰Range: 60℃~90℃ (140℉到 194℉), the default set
value is 80℃ (176℉)。
a. Press the SET button for 3 seconds to enter the Standard Tire Temperature Setting Mode.
The unit increases by 1℃ (1℉) with each press of the button. When it has reached 90℃
(194℉), pressing the button again will return the system unit to 60℃ (140℉).
b. The system will enter to display set Turn ON Mode automatically by quickly pressing
the SET button.
Set up Device TURN ON Mode︰Displaying Pressure, Temperature and
Pressure/Temperature rotate displaying, 3 modes for option, the default set is Pressure
displaying.
a. Quickly Pressing the Mode button will allow selection of the TURN ON Mode.
b. 3 modes are shown below. The pressure value can be psi, kPa, bar. The Temperature
value can be ℃, ℉ which can be changed by following the above instructions.
Pressure mode display Temperature mode display
Rotate Displaying Pressure & Temperature
c. After quickly Pressing the SET button to TURN ON the device successfully, the
system will enter AUTO Display TURN OFF Timing Set Mode automatically.
AUTO Display TURN OFF Timing Set Mode︰There are 4 modes to select: Normal ON, 1
minute display, 3 minutes display and 5 minutes display.
a. Quickly Press MODE button to select the AUTO TURN OFF Timing Mode. The AUTO
TURN OFF timing starts counting after receiving the 4 tires info. The system keeps
monitoring tire pressure, tire temperature and battery, any upon any abnormality,