User's Manual

3. How to Change the Unit of Tire Pressure and Temperature
W410 displays 3 kinds of pressure units, bar, kPa and psi. For temperature, Celsius or
Fahrenheit can be displayed. To change the factory default for pressure or temperature, press
the MODE button for 3 sec.
4. How to Modify Factory Default
W410 has 4 factory default modes for users to choose from. Press the SET button
continuously for 3 sec. to enter the set up mode from Front Tire-Standard tire pressure set up,
Rear Tire-Standard tire pressure set up, Tire Temperature-Over Temperature Warning, and
Operation Mode. For other parameter settings, please refer below for the relevant process:
NOTE: The user should change the suitable pressure unit for own vehicle before entering into
the setup mode.
Set up Front Tire Pressure Value: Range 24psi~80psi (1.7bar~5.5bar), the default set
value is 35psi (2.4bar)
a. Press the SET button for 3 seconds to enter the Front Tire-Standard Tire Pressure Setting
Mode. The unit increases by 1 psi with each press of the button. When it has reached
80psi (5.5bar), pressing the button again will return the system unit to 24 psi (1.7bar).
b. The system will enter to Rear Tire Pressure Value Mode automatically by quickly
pressing the SET button.
Set up Rear Tire Pressure Value: Range: 24psi~80psi (1.7bar~5.5bar), the default set value
is 35psi (2.4bar)
a. Press the SET button for 3 seconds to enter the Rear Tire-Standard Tire Pressure
Setting Mode. The unit increases by 1 psi with each press of the button. When it has
reached 80psi (5.5bar), pressing the button again will return the system unit to 24 psi
(1.7bar).
b. The system will enter to High Temperature Alarm Value Mode automatically by
quickly pressing the SET button.