User's Manual

W410 Systems Operation
1. Display Signals Description
：Battery Signal :Pressure Unit : Temperature Unit
：Battery Voltage Value : Normal Tire ：Abnormal Tire Pressure
：Abnormal Tire Condition Signal : Tire Pressure/Temperature Display Unit
NOTE
There is an ambient light sensor on the top right side of display that is able to adjust the
brightness automatically of the LED Display. The display will be brighter in the day and darker
in the night to ensure that the user will be able to read the LED Display clearly and not be
affected by external lighting.
2. Operation to Change Display Mode
W410 has 3 different modes. They are Tire Pressure Display Mode, Temperature Display
Mode, and Pressure-Temperature Alternate Mode. The display will show the tire pressure
mode once it is turned on. To enter the temperature mode press the MODE button once and
to display pressure-temperature press it another time. The system will continuously monitor
the tire pressure, tire temperature, battery voltage, no matter what kind of information is being
displayed and will notify the driver whenever anything abnormal happens. If the user does not
change from the factory default, the system will show the tire pressure display. The 3 modes of
display are as follows:
a. Pressure Display Mode: Display of 4 tires pressure and battery voltage unit only.
b. Temperature Display Mode: Display of 4 tires temperature and battery voltage unit only.
c. Pressure-Temperature Alternate Display Mode: Rotating display of tire pressure and
temperature with a constant display of battery voltage.