User's Manual

display shows a yellow “6”, this means that it is now in mode 6.
Reset starting from Right Front Tire -> Right Rear Tire -> Left Rear Tire -> Left Front Tire
automatically in order to complete the set up mode 6. The user should deflate the tire pressure
rapidly over 0.3bar/30kPa or 4 psi within 15 sec. until there is a beep sound, which means the
user has completed the set up
a. Depress the SET key to skip LF relearn or after completing the rapid deflation of Left
Front tire for relearn process. The system will return to the normal operation system
automatically.
Mode 7: Single Sensor Replaced
The user should confirm whether the all sensors are manufactured by ORO before carrying out
any changes or replacement. The system will not work with non ORO Technology sensors.
The monitor will display No.7 in yellow which means the system is in mode 7.
Choose a sensor to be replaced starting from Right Front Tire -> Right Rear Tire -> Left Rear
Tire -> Left Front Tire to complete the set up mode 7 and return to the normal operating mode.