User's Manual

Set up Rear Tire Pressure Value: Range: 24psi~80psi (1.7bar~5.5bar), the default set value
is 35psi (2.4bar)
a. Press the SET button for 3 seconds to enter the Rear Tire-Standard Tire Pressure
Setting Mode. The unit increases by 1 psi with each press of the button. When it has
reached 80psi (5.5bar), pressing the button again will return the system unit to 24 psi
(1.7bar).
b. The system will enter to High Temperature Alarm Value Mode automatically by
quickly pressing the SET button.
Set up Tire High Temperature Value︰Range: 60℃~90℃ (140℉到 194℉), the default set
value is 80℃ (176℉)。
a. Press the SET button for 3 seconds to enter the Standard Tire Temperature Setting Mode.
The unit increases by 1℃ (1℉) with each press of the button. When it has reached 90℃
(194℉), pressing the button again will return the system unit to 60℃ (140℉).
b. The system will enter to display set Turn ON Mode automatically by quickly pressing
the SET button.
Set up Device TURN ON Mode︰Displaying Pressure, Temperature and
Pressure/Temperature rotate displaying, 3 modes for option, the default set is Pressure
displaying.
a. Quickly Pressing the Mode button will allow selection of the TURN ON Mode.
b. 3 modes are shown below. The pressure value can be psi, kPa, bar. The Temperature
value can be ℃, ℉ which can be changed by following the above instructions.