User's Manual

-
3
-
W206 Systems Operation
1. Display Signals Description：
：Front Tire ：Rear Tire ：Pressure Unit ：Temperature Unit
：Tire status Signal ：Abnormal Tire Condition Signal ：Tire
Pressure/Temperature Display Unit
2. Operation to Change Display Mode：
W206 has 2 different modes. They are Tire Pressure Display Mode and Temperature Display
Mode. The display will show the tire pressure mode once it is turned on. To enter the temperature
mode press the MODE button once.The system will continuously monitor the tire pressure, tire
temperature, no matter what kind of information is being displayed and will notify the driver
whenever anything abnormal happens. If the user does not change from the factory default, the
system will show the tire pressure display. The 2 modes of display are as follows:
a. Pressure Display Mode: Display tires pressure.
b. Temperature Display Mode: Display tires temperature.
3. How to Change the Unit of Tire Pressure and Temperature：
W206 displays 3 kinds of pressure units, bar, kPa and psi. For temperature, Celsius or Fahrenheit
can be displayed. To change the factory default for pressure or temperature, press the MODE
button for 3 sec。
4. How to Modify Factory Default：
W206 has 3 factory default modes for users to choose from. Press the SET button continuously
for 3 sec. to enter the set up mode from Front Tire-Standard tire pressure set up, Rear
Tire-Standard tire pressure set up, Tire Temperature-Over Temperature Warning.
(MODE)
(
SET
)