Installation Guide

ManualsBrandsOrnamental Mouldings ManualsBuilding materials20509 Diamond 24 in. x 0.25 in. x 30.0 in. White Polyurethane Accent Wall Moulding

POLY PANELS | 1FOR MORE INFORMATION VISIT ORNAMENTAL.COM

Installation Steps

1. Assure that installation surface is smooth, clean and dry.

2. Measure and mark a vertical line at the center of the

installation surface. Note: pattern may be started from

the top, bottom, or center.

3. Apply small bead of adhesive to back of grid and

place the grid to the wall aligning with your center mark.

Remove any excess adhesive. Secure in place with

painter’s tape until cured. Note: Small ﬁnishing nails

may be used in lieu of tape.

4. Continue installing panels end to end and side by side,

leveling each as installed, trimming as necessary.

TOOLS NEEDED:

• Construction adhesive

• Fine sand paper

• Utility knife or saw

• Caulk and Spackle

• Painters tape

• Chalk Line

• Measuring tape

• Level

• 100% Acrylic latex paint

INSTALLATION PREPARATION:

• Acclimate materials in room for 24 hrs prior to installation.

• Read instructions before beginning.

• It is advisable to paint panels with 100% acrylic paint

prior to installation. Joints can be filled with spackle, sanded, and touched

up after installation if desired.

• You may find it helpful to tape the panels in place temporarily to determine

your favorite arrangement. Mark the outline. Remove and proceed to install using

the outlines for reference.

• Caulking may be indicated if the installation surface is uneven.

Poly Panel Instructions

Summary of content (3 pages)

PAGE 1
Poly Panel Instructions TOOLS NEEDED: INSTALLATION PREPARATION: • Construction adhesive • Fine sand paper • Utility knife or saw • Caulk and Spackle • Painters tape • Chalk Line • Measuring tape • Level • 100% Acrylic latex paint • Acclimate materials in room for 24 hrs prior to installation. • Read instructions before beginning. • It is advisable to paint panels with 100% acrylic paint prior to installation. Joints can be filled with spackle, sanded, and touched up after installation if desired.
PAGE 2
Español Instrucciones del panel de polientileno NECESITARÁ: NOTA: • Adhesivo de construcción • Papel de lija fino • Navaja o sierra • Masilla y masilla • Cinta de pintores • Línea de tiza • Cinta métrica • Nivel • Pintura látex 100% acrílica • Aclimate los materiales en la habitación durante 24 horas antes de la instalación. • Lea las instrucciones antes de comenzar. • Es recomendable pintar los paneles con pintura 100% acrílica antes de la instalación.
PAGE 3
Française Instructions pour le panneau poly AURA BESOIN: REMARQUE: • Adhésif de construction • Papier abrasif fin • Un couteau utilitaire ou une scie • Calfeutrer et Spackle • Ruban de peintres • Ligne de craie • Mètre ruban • Niveau • Peinture au latex 100% acrylique • Acclimater les matériaux dans la pièce pendant 24 heures avant l’installation. • Lisez les instructions avant de commencer. • Il est conseillé de peindre les panneaux avec de la peinture 100% acrylique avant l’installation.