Home Theater System User Manual

3 • Operation and Maintenance
Doc. 065291-01 3/09 67
Summary of Automatic Sample Processing
1. Complete the instructions in Section 3.2 through Section 3.8 to
prepare the ICS-2100 for operation and to prepare the sample for
processing.
2. If an autosampler is installed, prepare and fill the sample vials and
place them in the autosampler tray or cassette. Refer to the
autosampler manual for detailed instructions. Autosampler manuals
are provided on the Dionex Reference Library CD-ROM
(P/N 053891).
3. If an autosampler is not installed, load the sample into the injection
valve sample loop through the sample port on the ICS-2100 front
door (see Section 3.10.1
).
4. Use the Application Wizard to specify a program and quantitation
method, and create a sequence:
a. On the Sequence Control panel, click Application Wizard.
b. Select an application template from the list (see Figure 3-11
).
Figure 3-11. Application Wizard