Operation Manual

http://www.orion.ua 5
1. Remove the dust container from the product by pressing the dust container button, and
pulling the dust container away from the product. B
2. Holding the dust over a dustbin press the dust release button as shown, the botton of the
dust container will drop down to release the dirt. C
3. Close Push the dust container back into the product to refit.
4. The bottom of the dust container by pressing the base upwards until it clicks into place.
Cleaning the HEPA filter
To maintain the suction of the cleaner, the HEPA filter must be washed regularly.
After emptying any dirt into the dustbin.C
1. Remove the HEPA filter 12 from the dust container by turn the dust container back cover
anticlockwise. Remove the HEPA filter cover by.D
2. Remove the filter cover from HEPA as shown E
3. Rinse the HEPA filter cover in the lukewarm water and DRY THE FILTER COVER
COMPLETELY.
IMPORTANT: Do not use detergents to clean the filter. The HEPA filter must be thoroughly
dry before the machine is used.