Operation Manual

http://www.orion.ua 4
To remove the flexible hose
When removing, squeeze the clips both side and pull.
Fitting the tubes and accessories
1. Attach the tube to the handle end of the hose.
The hose handle features an airflow regulator 9 which allows suction to be reduced as required.
2. Attach the floor brush11 to the tube.
3. Attach the crevice nozzle 13to the tube.
Controls
Power: The on/off control is operated by On/off switch-button. 2
Variable power
A Variable power switch 3 varies the suction power as required .For example, maximum suction
can be used for cleaning carpets, hard floors etc, and reduced suction for cleaning upholstery and
curtains.
Suction can also be controlled using the airflow regulator 9 on the handle .Closed for maximum
suction, open for reduced suction.
Automatic cable rewind
After use, unplug and press the cable rewind button 1 to retract the cable.
WARNING: When using the cable rewind, always hold the plug as the cable will rewind quickly.
Dust disposal
The indicator is red when the dust is full, please clean the dust bag or replace it in time. Take out
the hose connector. Press the front cover button 5 to open the front cover and take out the dustbag
B.
Replace the dustbag
z If paper dustbag is adopted. Please throw away and replace new one.
z If textile filter is adopted, take down the dust bag, throw off the dust and fix it again.
Installing the dustbag
z Insert the bag collar into the grooves of dustbag support.C
B C
Cleaning the HEPA filter
To maintain the suction of the cleaner, the HEPA filter must be washed regularly.
1. Open the Air outlet cover. D
2. Remove the Air outlet sponge with the filter grille.
3. Resemble a new Air outlet sponge back to the place.
IMPORTANT: The Air outlet sponge must be thoroughly dry before the machine is used.