VACUUM CLEANER Model: ORION OVC-026 ENGLISH GB Please read it carefully before use and save it
http://www.orion.ua / support@orion.ua Dear Customer, Thank you for buying ORION products! Welcome to use! Please read this User’s Guide carefully before use and save it. Best regards, ORION ELECTRONICS Team More details: http://www.orion.ua Mail to us: support@orion.ua I. Importance & Safety Your vacuum cleaner is an electric appliance: it should be operated under normal conditions.
http://www.orion.ua / support@orion.ua appliance to the authorized maintenance store if happen conditions listed above. Never operate the appliance when the inlet has been blocked to avoid heat or deforming of the plastic component or damage of the motor. If the power cord is damaged, it should be replaced by the manufacture or its service agent in order to avoid a hazard. ● II. Structure and Components A. Structure figure 1. Floor nozzle 4. Hose 7. Handle 2. Adjustable Tube 5. Inhale plug 8.
http://www.orion.ua / support@orion.ua 10. Accessories cover 13. Cord rewind button 16. HEPA 19. Dust bag rack 22. Crevice nozzle B. Operation Guidance 11. Wind outlet 14. Indicator screen 17. Filter 20. Combined brush 12. Big wheel 15. Power Switch 18. Filter rack 21. Suction nozzle Take out the Inhale Plug by pressing the button according to the direction indicated in the figure at the left side. Open the Rear cover according to the direction indicated in the figure at left side.
http://www.orion.ua / support@orion.ua Plug in the inhale Plug into the unit. Set in the adjustable tube into the Curved Tube and make sure the connection is firm. Use of the Telescopic chrome extension tube. Adjust the tube to a proper length by pressing the control button, the tube will be lock automatically after releasing the button. III. Startup and Speed Control Plug in power cord, press the power switch to startup the machine.
http://www.orion.ua / support@orion.ua Combination floor nozzle This double-duty brush can be use for cleaning carpet and floor. Adjust the duty of the brush for bare floor cleaning and carpet cleaning by press the relative button. When the floor nozzle extends out brush, it is for bare floor, if without, for carpet. Press the accessory cover and open it. Take out the accessories. When use, insert it into the telescopic tube. Combination nozzle is use for cleaning gap, corner, baseboard and liner gap.
http://www.orion.ua / support@orion.ua IV. Dust Empty and Maintenance A. Empty Dust Take out the dust bag from the machine according to the left figure. Pour out the sewage into a dustbin. B. Maintenance Take the filtration rack apart from the machine according to the direction indicated in the figure at left side. Take out the filter, cleaning in water and let it dry naturally. ● Importance: 1. The filter should be cleaned twice a year. Or if it is visibly dustied, clean it at once. 2.
http://www.orion.ua / support@orion.ua V. Trouble Shooting Note: Cut off power and pull out the plug before starting to get rid of troubles. If the vacuum power decreasing, and sounds abnormally, stop vacuuming or motor over heat: Some vacuum components may be blocked….....dredge the blocked component. Filter been blocked .......................................clean or replace. If the trouble still exists, please contact maintenance service department. VI.