Operation Manual

12
2. Cleaning the Sponge and HEPA filter by soft brush or rinse it in lukewarm water and dry them
completely before use again. Or replace the Sponge and HEPA filter with a new one.
3. For exhaust HEPA filter, press the button on the grid, take out the grid out ( at left side of vacuum.).
4. Hand firmly and pull out the HEPA filter out .
5. Cleaning the HEPA filter by soft brush or rinse it in lukewarm water and dry them completely before
use again. Or replace the HEPA filter with a new one. (it is recommended to clean the exhaust
HEPA filter at least one time every 3 months.)
6. Assemble the grid back to the body.
Push Here