USER’S GUIDE MULTI-CYCLONE VACUUM CLEANER ENGLISH GB Model: OVC-022 http://www.orion.
The Advantages: 1. With advanced exclusive Dual-bins plastic centering true multi-cyclone system, no loss of suction. 2. Plus air outlet HEPA filter, enabling a highest cleaning efficiency. Good for allergy people and asthmatics. 3. 4. 5. 6. Super bigger power upto 2,400W max., 30Kpa max. (at 220-240V). Super bigger dust capacity upto 5 L max. Double functions with both suction and blowing. With remote speed control on handle for easy use.
10. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air flow. 11. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. 12. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or got ashes. 13. Turn off the control before unplugging. 14. Use extra care when cleaning on stairs. 15.
Product and accessories: Battery Room Handle Flexible Hose Telescopic Tube Carrying Handle Switch Button Brush Big Wheel Dust Cup Cover Crevice Nozzle Dust Cup Cover Release Button Plastic Centre Filter System Dust Cup Bottom Release Button Dust Cup Dust Cup Bottom Sofa Nozzle PRECAUTIONARY MEASURES Firstly opening the sucks in the air, to check if the suction pipe or the telescopic wand stick on pipe are blocked, you should switch off the vacuum cleaner at once.
1. Do not operate the vacuum cleaner too close to heaters like radiators, cigarette butts etc. 2. Before you insert the plug into the wall contact, make sure your hand is dry. 3. Before you start using the vacuum cleaner, please remove large or sharp objects from the floor in order to prevent the vacuum is damaged. 4.When you want to pull the plug from the wall contact, please do this at the plug itself and not by means of the electrical cable.
Insert hose joint into the air intake duct on the front of appliance. Press until it clicks into position. ** Removing the flexible hose from vacuum machine: Removing the plug from the power socket. Press release button on hose joint to remove the flexible hose from the vacuum machine. 2.Fixing the extension tubes and accessories a. Fixing the telescopic tube to the handle. b. Fixing the brush to the extension tube.
c. Fixing Floor brush Ideal for the daily cleaning on carpets and hard floors. 2.Cleaning tools use 1. Crevice tool: For radiators, crevices, corners, baseboards and between cushions. 2. Sofa nozzle is used for the furniture, Sofa, and bed. INSTRUCTIONS FOR USE Before using appliance, pull out a sufficient length of cable and insert the plug into the power socket. A yellow mark on the power cable shows the ideal cable length. Don’t expend the cable beyond the red mark. 1.
switch on the vacuum machine, then the machine will work at the max power. ON/OFF Switch 2. Power Control Button This vacuum machine is used a remote speed control device on the hose handle to control the power. You can use buttons on the hose handle to switch off or adjust the suction power of the machine. z Standby Button This button is used to switch between standby mode and operation mode. While the machine is operating, push this button returns the machine to the standby mode.
4. Parking the main floor brush on the vacuum machine: There is a parking device on the dust tank handle, where can park the floor brush. 5. Air-Blow Function : z z You may convert your machine to blow air out by attaching the Flexible Hose to the machine’s air outlet socket (at right side of vacuum). ( See “Change the exhaust HEPA filter” on how to remove the Air Outlet Grill.). The Blower Function is recommended for use to gather scattered dry waste such as leaves and confetti.
MAINTENANCE 1. How to drop dust and clean the dust cup Always operate the cleaner with dust cup installed. 1. Push the dust cup release button, handing the dust cup handle to rear side, take off the dust cup from the vacuum cleaner. 2. Press the dust cup bottom release button, then the dust will full down automatically. You may only do like this to drop the dust. 3.
(Plastic Centre Filter System) Dust Cup Bottom Release Button 2. Install dust cup on the body: 1. Pull the dust cup bottom back to the dust cup until the button be locked. 2. Put the dust cup onto the body case properly. 3. Push on the dust cup to fix with body. 3. Change or cleaning the inlet and exhaust HEPA filter 1.Push the dust cup release button, handing the dust cup handle to rear side, take off the dust cup from the vacuum cleaner. take out the inlet sponge and HEPA filter.
2. Cleaning the Sponge and HEPA filter by soft brush or rinse it in lukewarm water and dry them completely before use again. Or replace the Sponge and HEPA filter with a new one. 3. For exhaust HEPA filter, press the button on the grid, take out the grid out ( at left side of vacuum.). 4. Hand firmly and pull out the HEPA filter out . 5. Cleaning the HEPA filter by soft brush or rinse it in lukewarm water and dry them completely before use again. Or replace the HEPA filter with a new one.
Technical characteristics Model Power Voltage Twin dust bin system Power cord length Net weight Gross weight Unit box dimension Color ORION OVC-022 2000-2400W 220/240V~50Hz 5L 5m 11kg 12,5kg 50,8 х 36 х 38,5cm Red Completion Vacuum cleaner Long flexible hose with handle Telescopic stainless steel tube Up-down adjustable plastic floor brush Duster brush Crevice nozzle Air turbo rotating brush User’s guide Warranty card Extra information on ORION company web-site www.orion.