Operation Manual

‘bag’-vacuum cleaner.

z To empty the water container, pull the Cover Release Level upwards.(Fig1)

z Lift up the cover and pull out the filter assembly and remove the water tank with the handle on the tank.. (Fig2)

z Empty the container and clean, rinse and leave to dry.

z Regularly dismantle and clean the filter assembly.

z Remove the curved tube by pulling it from the meshed filter cage.

z Pull out the filter cage and remove the sponge filter. Wash and rinse all the components. Dry before assembling

them. (Note: the sponge filter must be equipped on the filter cage during working the machine.)

z To remove stubborn dirt from the container and the filter assembly, use normal washing-up liquid but make

sure it is rinsed thoroughly afterwards.

3. Front HEPA Filter

z If there is a noticeable drop in the suction power, this is an indication that the HEPA filter needs to be changed

with a new one or to be washed.

z Pull the Cover Release Level upwards and lift up the Tank Cover. (Fig1), then remove the water tank (Fig2),

take out the HEPA Filter Frame. (Fig11)

z Remove the HEPA Filter from the frame and insert a new one or wash it. (Fig12)

4. Air Outlet HEPA Filter

z Push the button on the Air Outlet Grill, remove the Air Outlet Grill from the body. (Fig13)

z Take out the Air Outlet HEPA Filter. (Fig14)

z Replace with a new one or wash it. It is recommended to have a wash or replace a new one each half year.

5. Storage

z Store your machine with care and in a cool dry place.

Caution: Use only original spare part.