Operation Manual

2. Remote power control:

This vacuum machine is also used a remote speed control device on the hose handle to control the power. You can

use buttons on the hose handle to switch off or adjust the suction power of the machine.

z Standby Button

This button is used to switch between standby mode and operation mode. While the machine is operating, push this

button returns the machine to the standby mode. And push again to re-start the machine. (within 10 seconds, the

standby button has power memory. Namely, if you re-start the machine within 10 seconds, the machine will work at

the same power as last time.)

Suction Power Selection Button

Use (+) or (-) button on the hose handle to adjust the suction power of the machine.

Note:

** If the remote control function is unworkable, please check the battery and change the battery inside the handle.

3. Telescopic Tube

z The extendable Telescopic Tube gives you added flexibility and control. Depending on your application and

situation, you may adjust the length of the Telescopic Tube to suit your needs. Push and hold the locking knob,

extend or retract the telescopic pole as required. Release the knob and pull the extended tube slightly to lock it

in place.

4. Crevice Tool : Use this accessory tool for corners, crevices and cracks.