INSTRUCTION MANUAL CERAMIC FAN HEATER ENGLISH GB Model: OR-FH15C 220V-240V 50Hz 750W/1500W http://www.orion.
DEAR CUSTOMERS! MANY THANKS FOR BUYING ORION CERAMIC FAN HEATER! We really believe you will get the greatest pleasure from using this device for the years! Please, read the user’s guide in detail before first using of this ceramic fan heater. GENERAL SAFETY INFORMATION 1. Read all instructions before using the Heater. 2. Use this Heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or injury to person. 3.
PARTS NAME 1. Pilot lamp 2. Thermostat 3. Swing button 4. Rotary switch 5. Outlet wind 6. Base OPERATING INSTRUCTIONS 1. 2. 3. 4. Remove the Heater from the carton. Place the heater on a firm level surface. Set the main power to ‘Off’. Plug the cord set into a 220V electrical outlet. The heater is equipped with 4-position rotary switch: SYMBOL 0 * I II FUNCTION OFF Fan without heater 750W (Low heat output) 1500W(Full heat output) 5.
OVERHEAT/TIP-OVER PROTECTION “Overheat protection” This heater is protected with an overheat protection that switches off the appliance automatically in case of overheat, e.g. due to the total or partial obstruction of the grids. In this case, unplug the appliance, wait about 30 minutes for it to cool and remove the object which is obstructing the grids. Then switch it back on as described above. The appliance should operate normally. Should the problem persist, please contact the nearest customer service.