Operation Manual

www.orion.ua

 Micro processor controlled:

1. Heating: Heating from low to high can satisfy to the different cooking

requirement.

2. Temperature setting: Set temperature, control fire level.

3. Automatic alarm: Through inside inspection system distinguish from if

there is a pan on the induction cooker plate or pan is metal.

4. Cleanness and convenience: Sleek design, easy to clean.

Operating instructions

1. Operating method:

ON/OFF: Is the button used to either switch ON or OFF the Induction cooker's

Power supply.

TIMING: Is the button used for Fixing the time for the different cooking options

like Chaffy Dish, Fry, Boil and Milk.

Using the digital display we can see the different option settings for Watts

(Chaffy Dish), Temperature (Fry) and Time. The digital display corresponds to

the corresponding function like power, temperature and timing.

2. Function explanation

1. When you Switch ON the Power supply, the buzzer will be on for a

second and then Power indicator light starts flashing / blinking

indicating that the system is ON but the state of rest.

2. Press one of the Cooking Option Buttons to start the Required

Cooking function and the cooker starts working.

3. Cook Function Setting

Each and every different type of cooking maybe set at different settings as per

the guide line provided by the manufacturer or you can start setting Power

(Chaffy Dish) and Time and Temperature (Fry) as per your different choices of

the cooking types and of the cooking Taste. This is not at all mandatory for

you to follow exactly as per the function set buttons. We have kept it flexible

for you to choose the different setting as per individual tastes and

requirements in different countries.

1. Press the Function to Milk warming, the corresponding indicator light or

LED will be on. There is a function for showing Electricity and Voltage by

pressing the button Electricity / Voltage.

2. Press the Function to Barbecue the corresponding indicator light or LED

will be on. This is an Automatic setting function for Power and Electricity.

There is a function for showing Electricity and Voltage by pressing the

button Electricity / Voltage.