Operation Manual

http://www.orion.ua
[e-mail]
4
Usage of Sterilization
1. Put the bottle warmer on flat surface.
2. Open the cover and pour 40ml-50ml water into the unit. (figured as pic. 󰈆)
3. Put the feeding bottle into the unit. (figured as pic. 󰈇)
4. Connect the powder supply and press the sterilizing button, then red light shows sterilizing.
(figured as pic. 󰈈)
5. The indicator turns off when sterilizations is finished. (figured as pic. 󰈉)
Note: please make sure the bottle warmer is clean before use.