Installation and User’s Guide 18.5"/ 21.
Installation and User’s Guide Warning Statements * Follow this safety instruction to use the monitor properly and prevent the damages. * This safety instruction has “ Warning” and “ Caution” as below. WARNING: If the user does not follow this instruction, it may cause the serious damage to the user. CAUTION: If the user does not follow this instruction, it may cause the slight damage to the user or cause some damages to the monitor. * Keep this user’s guide book for later use.
Installation and User’s Guide Warning Statements Do not install this monitor on the outside and near water. If may cause damage to the product, electric shock and fire. For cleaning do not use liquid cleaners. Never touch the power plug with wethands. When lightning and thundering, unplug the monitor from the wall outlet and never touch it. Unplug this product from the wall outlet, when It does not operate for a long time.
Installation and User’s Guide Cautions Install this monitor some distance From the wall and do not install unless Proper ventilation is provided. Place this product on a stable place. If not, it may fall, causing serious Damages to the monitor and people. The openings must not be blocked by curtain, rug or other similar surface. When carrying this monitor, be careful not to damage the panel and drop it It may cause some trouble.
Installation and User’s Guide TABLE OF CONTENTS 1. INSTALLATION ................................................................................................................. 6 1.1 Unpacking …….............................................................................................................. 6 …….............................................................................................................. 6 1.2 Part List 1.3 Main Functional Button ……...........................................
Installation and User’s Guide INSTALLATION 1.1 Unpacking Remove the package cover and place the product on a flat and secure surface or in the installation location. This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Check whether all the following device and accessories are included with the main system. If any items are missing, notify your Sales or Customer Service Representative. 1.
Installation and User’s Guide INSTALLATION 1.3 Main Functional Button 1 RECALL Select to reset all setting to the factory default values. 2 ASPECT Turn on the monitor and set the monitor ratio to 4:3, wide.. 3 AUTO Adjust screen automatically. 4 + Move to the right (increase) on OSD. 5 ‐ Move to the left (decrease) on OSD. 6 MENU Activates and exits the OSD 7 / POWER Turns the power ON or OFF.
Installation and User’s Guide INSTALLATION 1.4 Connection 1 VGB In (15 Pin D-SUB) 2 DVI-D In 3 Audio In Connect the VGA signal cable. Connect the DVI cable. Connect the Audio cable.
Installation and User’s Guide OSD (On Screen Display) SETTING 2-1 D-SUB Mode 2-2 DVI Mode pg9
Installation and User’s Guide 2-3 Miscellaneous Menu Color control screen OSD control screen (VGA) OSD control screen (DVI) pg10
Installation and User’s Guide 2-4 OSD Function pg11
Installation and User’s Guide FEATURES 3.1 Specification VIDEO Screen Size 18.5” 21.5” 23” Pixel Type Active Matrix TFT Active Matrix TFT Active Matrix TFT Panel Resolution 1366 x 768 @60Hz 1920 x 1080 @60Hz 1920 x 1080 @60Hz Pixel Pitch 0.3mm x 0.3mm 0.248 x 0.248 mm 0.265 x 0.
Installation and User’s Guide APPENDIX 4.1 D-SUB Connector PIN Assignment PIN NO. PIN Name PIN NO.
Installation and User’s Guide INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Installation and User’s Guide TROUBLESHOOTING * When the following troubles are occurred, follow the trouble shooting. Before contacting a service center. Troubleshooting Troubleshooting Tip 1. Make sure if the power supply is connected property The screen doesn’t show up 2. Turn on the power. 3. Select the input signal right for the connected port. The screen is too light or to dark Control the BRIGHTNESS The screen size is not fit for the PC signal Press the AUTO key among keys in the front.
Installation and User’s Guide 2Year Limited Warranty All Orion Images products carry a limited warranty from ship date against defects in materials and workmanship. Orion Images is not liable for improper installation that results in damage to mounts, adapters, display equipment or personal injury. Contact Orion Images In the event of missing and/or damage equipment, or technical questions, the following information can help in the completion of the installation.
