User`s manual

42
Chapter 3: System Administration
Remove RAID •
Click to remove the RAID volume. All user data and iSCSI created in the selected RAID volume will be
deleted.
To remove a RAID volume, follow the steps below:
On the RAID List screen, select the RAID volume by clicking on its radio button, and click RAID 1.
Information to open the RAID Configuration screen.
On the RAID Configuration screen, click Remove RAID.2.
A confirmation screen will appear, you will have to click “Yes” to complete the “Remove RAID” 3.
operation.
Remove RAID destroys all data in the selected RAID volume. The data
will be unrecoverable.
Expanding a RAID(Dose not apply to the N2520/N2560)•
To expand a RAID 1, RAID 5, or RAID 6 volume, follow the steps below:
Replace one of the hard drives in the RAID volume and allow it to automatically rebuild.1.
Once rebuilt, you can continue to replace any remaining disks in the RAID array. 2.
When you are done replacing hard drives, log on to Web Management. Navigate to Storage> 3.
RAID to open the RAID Configuration screen.
On the RAID Information screen, click Edit to open the RAID Configuration screen.4.
On the RAID Configuration screen, click Expand.5.