User`s manual

32
Chapter 3: System Administration
Netmask/Prefix Length Input netmask for IPv4 and Prefix length for IPv6.
Gateway Gateway for associate NIC.
Default gateway It can be chosen from a drop down list of default gateway that’s been used for the Thecus IP
storage.
Only use Jumbo Frame settings when operating in a Gigabit
environment where all other clients have Jumbo Frame Setting
enabled.
Proper DNS setting is vital to networks services, such as SMTP and
NTP.
Most faster Ethernet (10/100) Switches/Routers do not support Jumbo
Frame and will not be able to connect to your Thecus NAS after Jumbo
Frame is turned on.
Thecus LED Controller3.3.20
There is an LED with the Thecus logo on the left hand side of the system. The LED light can be
turned on or off by enabling or disabling it.
Storage Management3.4
The Storage category displays the status of storage devices installed in the Thecus IP storage. It in-Thecus IP storage. It in-. It in-
cludes storage configuration options such as RAID and disk settings, iSCSI (N4520/N4560) and ISO
Mount (N4520/N4560).
Disks Information3.4.1
From the Storage menu, choose the Disk Information item and the Disk Information screen appears.
From here, you can see various installed hard disks. The disk slot position will appear if the mouse is
moved over the installed disk.
The screen shot below is just an example from a Thecus IP Storage.
The disk slots number can range from 1,2 to 4 slots depending on the
model of Thecus IP storage. Also it will list the disk info of JBOD devices if
applicable.