User`s manual

32
DISK VOLUME OVER 2TB
The 2+TB HDD support is determined by the chipset used in the device and the
operating system itself. The RAID Unit supports and recognizes 2+TB HDDs, but
the actual 2+TB support will vary depending on the different operating systems
used.
If the OS does not support over 2TB, you can still use the RAID Unit by NOT
checking the “Over 2TB” option under the “Configuration” option tab. The RAID
MASTER should automatically re-adjust the available HDD(s) storage capacity
and format the chosen RAID mode under 2TB. Please see “Over 2TB” section
under Q&As for more information.
SAFE REMOVAL OF THE RAID UNIT
Safe removal of the RAID Unit from the host controller is highly recommended,
especially when switching interfaces. In order to safely remove your RAID Unit
from the host controller, you would need to eject the device on your host
controller system.