User`s manual

MIXED RAID STATUSES

When a New HDD that’s been formatted with a certain RAID mode in another

RAID Unit (specifically DataTale AIR) and is placed into the current RAID Unit

along with an existing HDD, a “Mixed RAID” status will result. Under this

circumstance, the New HDD can be re-formatted as JBOD (None RAID) mode.

To do so, please complete the following steps:

1. The New HDD will appear as “RAID 0 (Broken)”, or other variations

depending on the situation for other RAID modes. The existing HDD will

appear as “JBOD” for individual HDD, or other variations depending on the

situation for other RAID modes.

2. To erase the previous formatting in the New HDD, click the “Delete RAID

Info” icon under “Disk Information”.

“Delete RAID Info” will erase all data stored on the New HDD. If you have

important saved data in the New HDD, backup all data before selecting “delete

RAID Info”.