User`s manual

25
4. A popup window stating, “Copy Data From Disk 1 to Disk 2. All data in
Disk 2 will be lost. Continue?” Click on the “Yes” icon to confirm.
5. During the rebuild, a “Rebuild Percentage” status window will appear and
the information under “RAID Status” and “Disk Information” sections
should reflect the same.
If data is accessed while the chipset is processing the Rebuild task, the
speed of data access may vary or decrease. Hence, data access of the
HDD(s) during Rebuild is highly not recommended.
Even if the RAID Unit loses connection to the host, the Rebuild will continue.
If the RAID Unit is powered off, the RAID Unit will retain the Rebuild status in its
memory. When the RAID Unit is powered “on” again, the Rebuild process will
resume from the previous status.