User`s manual

13
CONNECTING THE RAID UNIT TO A COMPUTER
To connect the RAID Unit, please complete the following steps:
1. Connect the AC/DC Power Adapter to the RAID Unit.
If need to change the Adapter Head, press the click release to slide off
the existing Adapter Head from the AC/DC Adapter. Then, replace it with a
different Adapter Head in the same manner.
P
r
ess he
r
e
t
o
r
elease the clip
2. Insert both ends of the USB 2.0, eSATA, or FireWire 800 cable(s) into the
corresponding port of the RAID Unit and the host.
The RAID Unit should only be connected to a host computer via one
interface. Connection of the RAID Unit to a computer via two or more
interfaces simultaneously is highly not recommended, especially for data
transfers.