User`s manual

WAN/LAN1 Configuration

Item Description

Host name Host name that identifies the N2200PLUS on the network.

Domain name Specifies the domain name of the N2200PLUS

WINS Server

To set a server name for NetBIOS computer.

MAC Address MAC address of the network interface.

Jumbo Frame Support Enable or disable Jumbo Frame Support of the WAN interface on your

N2200PLUS.

IP Sharing Mode When enabled, PCs connected to the LAN port will be able to access the

WAN.

Set IP Address by:

Static / Dynamic

You can choose a static IP or Dynamic IP, and input your network

configuration.

IP IP address of the WAN interface.

Netmask Network mask, which is generally: 255.255.255.0

Gateway Default Gateway IP address.

DNS Server Domain Name Service (DNS) server IP address.

NOTE

• Only use Jumbo Frame settings when operating in a Gigabit environment where

all other clients have Jumbo Frame Setting enabled.

• Enabling DHCP automatically turns on UPnP— see the Service Support Screen.

• If you are only using the WAN port, we suggest that you disable IP Sharing

Mode. This will result in higher throughput.

• A correct DNS setting is vital to networks services, such as SMTP and NTP.

WARNING

Most Fast Ethernet (10/100) Switches/Routers do not support Jumbo Frame and you will not

be able to connect to your N2200PLUS after Jumbo Frame is turned on. If this happens, turn

off the N2200PLUS. Then, press the reset button on the front panel right below power button.

System will bring your network settings back to factory default.