User`s manual

2. Install HDD on the tray, as the following chart:

3. Install the tray with HDD into N0204 miniNAS,

please note that the HDD-1 is in left side and

HDD-2 is in right side. The triangular symbol of

tray must be corresponding with the triangular

symbol of back panel. Push the tray back.

N2200/N2200PLUS:

The N2200/N2200PLUS supports both 2.5” and 3.5” Serial ATA (SATA) hard disks.

To install a hard disk into the N2200/N2200PLUS, follow the steps below:

1. Open front cover of the N2200/N2200PLUS.

2. For 3.5” HDDs

a. Remove an HDD tray and install a 3.5” SATA hard disk onto it.

4 screw

here