User manual

Data Locker User Manual 7
Changing The Encryption Key
STEP 1: Turn on the Data Locker and enter the default password
“000000” or your user defined password followed by the
button.
STEP 2: Immediately press the “Setup” option on the touch screen.
If “Setup” is not selected within 5 seconds the Data Locker will
automatically connect to the computer.
STEP 3: Press “Change Encryption Key” on the touch screen.
If you wish to quickly erase all the data stored on the Data Locker and make it available
for another person to use you can follow the steps below to “Change The Encryption
Key”.