User manual

Data Locker User Manual 11
Initialising & Formatting Data Locker
STEP 9: If you want to assign a specific drive letter to your Data Locker, select the
letter you want from the drop down menu, otherwise accept the default provided
automatically provided by Windows and click “Next”.
STEP 10: Select “Format This Partition With The Following Settings” and ensure that
the “File System” type is set to NTFS in the drop down menu (as per figure 3) and click
on “Next”.
Figure 3
STEP 11: Check the settings and click “Finish” to begin formatting the Data Locker.
STEP 12: When the formatting has finished your Data Locker should now be labelled
“New Volume” with its new drive letter. Your Data Locker is now ready to be used.