Owner's Manual

10
www.origineffects.comOrigin Effects MAGMA57
Step 1: Set POST-DRIVE EQ switch for the connected amp or device
POST-DRIVE EQ controls (continued)
Use the tables below to help you set up the MAGMA57 for the rst time with a new guitar amplier or
at-response device. Working through Steps 1 and 2 allows you to “set-and-forget” the POST-DRIVE EQ
controls and move on to having fun dialling in your ideal tone with the main controls.
*Please note: the ADJ control is not active when the POST-DRIVE EQ switch is in the P/AMP position.
Step 2: Fine-tune the POST-DRIVE EQ with the ADJ control*
AMPLIFIER OR CONNECTED DEVICE POST-DRIVE EQ SWITCH POSITION
Power amp & guitar speaker
Mixing desk & cabinet simulation
Recording interface & cabinet simulation
P/AMP
Bright, mid-scooped guitar amplier EQ1
Dark or Mid-rich guitar amplier EQ2
HOW IS THE MAGMA57’S TONE? TURN THE ADJ CONTROL...
Too bright or thin Clockwise
Too dark or woolly Counterclockwise
Just right! Leave in this position and enjoy using the pedal!