SNBC CONFIDENTIAL SNBC CONFIDENTIAL USER’S MANUAL JK-E01 ETHERNET INTERFACE MODULE （Trial Version） Shandong New Beiyang Information Technology Co., Ltd. No.
SNBC CONFIDENTIAL Declaration Information in this document is subject to change without notice. The manufacturer and supplier reserve the right to improve products as new technology, components, software, and firmware become available. If users need the further data about these products, please feel free to contact our market department or our agents.
SNBC z CONFIDENTIAL The quality control system of New Beiyang has been approved by the following certification. DNV ISO9001: 2000 Safety Instructions Before installing and using the printer, please read the following items carefully. 1) Please comply to the cautions in Printer User’s Manual, as this interface module belongs to a part of printer. 2) Don’t connect phone line with the communication interface of the interface module. 3) Keep this manual carefully in hand for usage and reference.
SNBC CONFIDENTIAL TABLE OF CONTENTS Declaration ............................................................................................................ 2 Copyright ............................................................................................................... 2 Trademarks: .......................................................................................................... 2 Marks means .............................................................................................
SNBC CONFIDENTIAL 1. Overview 1.1 Product Description The interface module operates with Beiyang printer to implement Ethernet communication functions. 1.2 Main Features Support following functions and protocols: 10 BASE-T Communication Port 9100 Net WinConfig Configuration IP ARP ICMP TCP UDP DHCP CLIENT TFTP 2.
SNBC CONFIDENTIAL 2.Controlling board 3.Interface fixing plate 4.10-BASE-T communication interface Top view: Fig.3-1 3.2 LED Indicator It has one yellow and one green LED indicator as follows: The green LED lights when it connects to Ethernet. The yellow LED lights until there has been no activity for 6 ms (i.e. each transmission, reception, or collision produces a pulse lasting a minimum of 6 ms) 4. Installation of Interface Module 4.
SNBC CONFIDENTIAL 5. Usage of the Interface Module 5.1 Print Self-test Page After the Interface Module is installed, refer to printer user’s manual to print self-test page.
SNBC CONFIDENTIAL Click picture of BTP-2002CP printer installed, open property column and select the property page of “Port”.
SNBC CONFIDENTIAL Now TCP/IP Port is not installed, first click “Add Port” button of the property page of “Port”. Select “Standard TCP/IP Port” in the list box of “Printer Port” and click “New Port” Button.
SNBC CONFIDENTIAL Click “Next Step” Button Fill with “printer name or IP Address” in corresponding editing column, of which the content is same with self-test page of printer, and then click “Next Step” Button.
SNBC Default the content and click “Next Step” Button. Finishing the port adding and click “Finish” Button.
SNBC CONFIDENTIAL Select new TCP/IP Port and click “Apply”, then “confirm”, and TCP/IP Port configuration is finished. 5.4 Program Upgrade JK-E01 Interface Module supports firmware upgrade, which depends on TFTP Protocol to function. Any TFTP client tool can transmit the firmware-upgrading file to Port 69 of the interface module for upgrade. In upgrade it must use the firmware offered by New Beiyang.
SNBC CONFIDENTIAL 6. Interface Signal 6.1 Parameter of Network Interface Socket It meets with 10BASE-T Standard of IEEE802.3 The Socket of Interface Module Pin Signal Name Description 1 TX+ Data transmission 2 TX- Data transmission - 3 RX+ Data receive+ 4 NC Reserve 5 NC Reserve 6 RX- Data Receive- 7 NC Reserve 8 NC Reserve + 6.
