Product Card

oricom.com.au
Oricom
®
is the registered trademark of Oricom International Pty Ltd.
KEY FEATURES
The UHF390 removes the
need for a head unit, with
all of the radio's controls
in the microphone. The
integrated speaker in the
controller mic works with
the transceiver speaker to
deliver exceptional sound
quality and volume.
UHF390 Technical Specification
GENERAL
Compliance
AS/NZS 4365:2011
Frequency Range TX/RX
476.425 - 477.4125 MHz
Number of TX/RX Channels
80 UHF CB (75 Voice channels)
Channel Spacing TX/RX 12.5KHz
Operating modes
Simplex, Repeater TX offset (+750kHz)
Scanning Speed
130 msec per channel
Antenna Impedance
50 Ohms
Operating Volts nominal 13.8VDC
Operating Volts Range
10 to 15 VDC
Over Voltage Protection
voltage regulator
Over Current Protection 2 AMP fuse
Reverse Polarity Protection Shunt diode
Frequency stability
+/- 2.5ppm
TRANSMITTER
RF Output Power Nominal 5 watts
Modulation F3E(FM)
Maximum deviation 2.5KHz
Spurious Emissions
< -70 dBc
TX Audio pre-emphasis
+ 6dB/octave from 300Hz to 3kHz
Current consumption during TX 1.5 Amps with 50 Ohm antenna
termination
RECEIVER
Circuit Type
Direct conversion by Single DSP chip
Intermediate Frequencies
Maximum useable sensitivity
Less than -122dBm at 12dB SINAD
Audio output power
3 Watts Maximum
RX Audio de-emphasis
-6dB/octave 300Hz to 3kHz
MECHANICAL
Transceiver Dimensions
27 (h) x 102 (w) x 85 (d) mm
IF = 137KHz
• 5 watt (max TX power)
• Heavy duty controller speaker
microphone
• Rugged micro size transceiver
Large easy to read LCD display
• Automatic Level Control (ALC) for
consistant audio levels
•
• 38 CTCSS and 104 DCS codes
• Duplex (range extender)
• Open/Priority scan
Priority channel
•
Designed for Australian
conditions. Made in Korea.
3.5mm external speaker jack
•
•