Designer phone TP6 User Guide Keep for future reference
Warnings Do not use your telephone during an electrical storm thunderstorm as it is possible to get an electric shock. Refer to information contained in Telstra White pages directory. The earpiece of the handset may attract small metal objects such as staples and pins. Care should be taken when placing the handset near these items. Temperature and ambient conditions The telephone is designed for indoor use (temperature range of -10 °C to 50 °C).
Location of controls 7 6 5 4 1 3 2 1 2 3 4 5 6 7 Mute button Recall button Memory button Redial button Store button Recall setting switch Ringer Hi/Lo/Off switch N13134 The A-Tick symbol indicates that this product complies with all current Australian ACA standards.
1.1 Notes for operation in New Zealand The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.
1.2 Quick Setup The Oricom TP6 telephone is used like any conventional telephone and works with all modern telephone exchanges using the tone dialling system. Plug one end of the line cord into the bottom of the phone and the other into the wall socket using the plug supplied. 1.3 Check contents of pack The following items are supplied in this pack: one telephone base one telephone handset one short telephone cable one long telephone cable one warranty card one operating Manual 1.
1.6 Adjustable ringer volume You can use the RINGER HI/LO/OFF slide switch located on the side of the telephone to select the incoming ring volume. Should you not want to be disturbed, use select OFF position. 1.7 Last number redial If the number you have dialled is engaged or you were unable to get through to anybody, simply replace the handset. The last number dialled will be saved in the telephone memory. To use the redial facility, proceed as follows: 1. Lift the handset. 2.
Dialling a Stored Number: Pick up the handset and press MEMORY button. Then press the memory location number (0, 1 ...9). The telephone then automatically dials the number stored in that location. 1.10 Muting the microphone You can switch off the microphone during a call using the MUTE button. It is then possible to speak without the other party hearing you. You can still hear the other party. To mute the microphone, press and hold the MUTE button during a call.
Warranty Information This product is covered by a 12 month warranty against defective workmanship or parts, effective from the date of purchase. The warranty does not extend to damage caused by misuse, negligence, excessive voltage, faults on the telephone line or lightning. This warranty in no way affects your statutory rights. Full details of the warranty are contained in the enclosed warranty card.
