Instructions / Assembly
Connect the two halves of the frame
by the male ends of Part 1 to the
female ends of Part 2 and secure the
frame by the push buttons. Attach
the Castors Part 6 to the frame with
the nuts Part 7. Place one washer
Part 8 above the bottom bar and one
washer Part 8 below the bottom bar as
shown in the picture.
Insert the side bars Part 3 as
shown and set the desired
height with the push buttons.
Connect the two halves of the
hanger bar by the male end of
Part 4 to the female end of
Part 5 and secure the frame by
the push buttons.




