Installation Guide

7
WWW.OREIN-USA.COM
Screw the mounting screws (B) into the
drywall anchors in the ceiling and leave a
little gap 0.025-0.032 inches.
Use the screwdriver to remove the knock outs
on the xture.
Installation-Surface Mount
3 4
Align the keyholes with the mounting
screws, and slide to secure the xture
rmly.
Plug the power cord (CC) into the power outlet,
and use the zip-tie (F) to x the cord if
necessary.
Turn on the light with switch on the xture.
5 6
R
0.025-0.032”
Drill two holes in the ceiling with the
spacing 17.3 inches.
Use a hammer to knock the dry wall anchors
(A) into the holes.
1 2
17.3”