User Manual

vertical refresh rate may work better than 60 Hz or
higher.Usethesourceremoteat thereceiver emitter
totestIRfunctionality.IftheIRremotefunctionisnot
responding, check the emitters to ensure they are
placed correctly and are plugged into the correct IR
jacks on the Extender set receiving and transmitting
units.
8.WidebandIR(30KHz---60KHz)introduction
IRBLASTER(TX)
Tocontrolthesource:PlugIRBlasterintoIRTXport
oftransmitterunit;placeblasterinfrontoftheIReye
ofthesource.
IR R E C E I V E R
IR B L A S T E R